Explore our comprehensive range of high-quality air filtration solutions designed for a variety of industries.
From HVAC filters to HEPA and industrial applications, our air filters offer superior performance, energy efficiency, and long-lasting reliability.
Find the perfect filter to meet your needs.
Wildfire smoke drifting across cities and airborne pathogens lingering in crowded spaces have pushed building owners to seek filtration that goes beyond everyday MERV 13 or 14.
Yet installing full HEPA banks often means costly fan upgrades and deeper filter racks. Enter the MERV 15 filter definition: under ASHRAE 52.2, a MERV 15 filter captures at least 95 percent of 1-micron particles—fine enough to remove most PM 2.5, bacteria, and smoke aerosols—while still fitting standard commercial HVAC frames.
This “near-HEPA” performance offers a pragmatic middle ground: significant indoor-air-quality gains without the capital expense of converting your entire air-handling system to clean-room standards.
A MERV 15 filter occupies the highest tier on the standard MERV scale before jumping to true HEPA. To earn this designation under ASHRAE Standard 52.2, the filter must remove at least 95 percent of particles measuring 1 micron across the rated airflow range.
That efficiency extends deep into the PM 2.5 spectrum, capturing wildfire smoke, diesel soot, and many airborne bacteria that slip through lower-grade filters.
Most MERV 15 products rely on two advanced media designs. Micro-glass fiber mats layer ultra-fine glass strands in a gradient structure, offering high efficiency with modest pressure drop.
Nanofiber-coated synthetics use a thin web of polymer fibers—measured in nanometers—applied over a conventional base layer, enhancing sub-micron capture while resisting moisture and microbial growth.
Both constructions are available in deep-pleat cassettes, rigid V-banks, and multi-pocket bag filters that fit standard HVAC racks, making MERV 15 an accessible upgrade for systems seeking near-HEPA performance without full clean-room retrofits.
MERV 15 media captures at least 95 percent of particles under 2.5 microns, including wildfire and cigarette smoke aerosols. Lower indoor PM 2.5 levels translate to reduced asthma attacks and cardiovascular risk.
Many pathogens—such as Legionella and Streptococcus—measure 0.5–1 micron. By trapping them at near-HEPA efficiency, MERV 15 filtration cuts the spread of respiratory infections in offices, schools, and outpatient clinics.
Smaller allergen fragments like mold spores, pet dander, and pollen shards are intercepted before they circulate, easing symptoms for allergy-sensitive occupants and helping buildings meet WHO and EPA IAQ targets.
Clean-Link offers a range of high-performance air filtration products designed for various settings in all industries. Our solutions are tailored to improve indoor air quality and employee comfort.
| Filter Type | Efficiency @ 1 µm | Typical ΔP (Pa) | Relative Cost | Best Fit |
|---|---|---|---|---|
| MERV 14 | ≥ 90 % | 120–150 | $$ | IAQ upgrade, PM 2.5 control |
| MERV 15 | ≥ 95 % | 150–190 | $$$ | Near-HEPA performance, clinics |
| HEPA (H13) | ≥ 99.97 % @ 0.3 µm | 250 + | $$$$$ | Cleanrooms, isolation wards |
MERV 14 offers solid fine-particle removal with moderate pressure drop. HEPA achieves surgical-grade filtration but requires deeper racks, larger fans, and higher costs.
Positioned in between, **MERV 15 delivers near-HEPA capture of PM 2.5 and bacteria while fitting standard HVAC frames—making it the practical choice for facilities seeking a significant air-quality boost without a full clean-room retrofit.
MERV 15 filters help maintain clean air in general treatment areas, offering strong defense against airborne bacteria and allergens. While HEPA is required in surgical suites, MERV 15 is an effective option for wards where ultra-clean air is essential but space and HVAC power are limited.
In critical areas like filling and packaging, MERV 15 supports contamination control for sterile products, especially where full cleanroom specs aren’t feasible.
Maintaining hygienic conditions during mixing, packaging, and bottling operations is vital. MERV 15 filters help reduce microbial and dust contamination without incurring the system upgrades needed for HEPA.
In executive suites or environmentally certified buildings, MERV 15 offers elevated IAQ performance. It improves occupant health, reduces complaints, and contributes to LEED and WELL certification goals.
MERV 15’s flexibility and strength make it a go-to solution in semi-critical environments balancing air quality and operational efficiency.
Installing MERV 15 filters introduces a higher pressure drop (ΔP) compared to lower-rated filters like MERV 11 or 14. This increased resistance requires more fan power to maintain airflow, potentially straining older HVAC systems.
To counteract this, systems should be evaluated for fan capacity. Modern solutions such as ECM (electronically commutated motors) and VFDs (variable frequency drives) can dynamically adjust airflow to optimize energy use, making MERV 15 adoption more efficient.
While initial energy consumption may rise, a lifecycle cost analysis often reveals long-term savings. MERV 15 filters reduce downstream contamination, extend equipment lifespan, and improve indoor air quality—benefits that offset operational costs over time. Proper sizing and integration are key to unlocking these gains without overburdening HVAC systems.
Before upgrading to MERV 15 filters, ensure your HVAC system can accommodate the increased performance demands. Use this checklist to guide your evaluation:
Confirm that the filter housing can accommodate deeper filter media, typically 4 inches or more for MERV 15 efficiency.
Check for high-quality gaskets around the frame to prevent air bypass. A tight, leak-proof fit is essential to maintain true filtration performance.
Conduct smoke or tracer gas tests to detect leaks around the filter edges, which can undermine filtration and IAQ compliance.
Review your system’s fan curve. Make sure it can handle the higher pressure drop (ΔP) associated with MERV 15 filters without sacrificing airflow.
Assess motor strength and consider ECM upgrades for efficient airflow control under increased resistance.
Proper maintenance ensures optimal performance and energy efficiency from MERV 15 filters. These high-efficiency filters require more attention than lower-rated options due to higher particle capture and pressure drop.
Install differential pressure (ΔP) gauges across the filter bank to track loading. Regular readings allow for data-driven change-out decisions.
Plot ΔP readings over time to identify the inflection point where airflow resistance spikes, indicating it’s time for replacement.
Typical change-out intervals range from every 2 to 4 months, depending on system use, indoor air quality, and environmental loads.
Always follow local guidelines for disposing of used filters, especially when handling biological or hazardous particulates captured from critical environments.
MERV 15 filters support a range of air quality certifications and regulatory standards:
LEED EQ Credit
Contribute toward LEED Indoor Environmental Quality (EQc) points by improving ventilation filtration efficiency.
WELL Building Standard
Meet WELL Air features A05 and A12, which emphasize enhanced air filtration to reduce exposure to airborne contaminants.
ISO 14644 Compliance
Enable upgrades in controlled environments to ISO 14644 cleanroom classifications, especially in food, pharma, and electronics.
Local PM2.5 Regulations
Help meet city- or state-level mandates for indoor PM2.5 reduction in response to pollution and wildfire smoke events.
MERV 15 filters offer near-HEPA performance without requiring full cleanroom systems, making them ideal for advanced IAQ goals. Their ability to capture fine particulates like PM2.5 and bacteria is valuable in both industrial and commercial environments.
Before upgrading, assess your HVAC system’s static pressure capacity, fan performance, and filter rack compatibility. For optimal results, consult an indoor air quality expert to ensure proper selection, installation, and maintenance planning.
Selecting the right air filters for your facilities can be a challenging task, given the variety of filter types and specifications available. If you're unsure about which filter best suits your needs, our team of experts is here to help.
With years of experience in air filtration solutions, we can guide you in choosing the ideal filter to optimize your application's performance and ensure superior air quality.
Contact us today for personalized advice and assistance tailored to your specific requirements.
